Print, Print, Print

I quite enjoy making woodcut prints so I tried to make one of the bridge lately. I took this photo -

Then mirror imaged it, and drew that image on a sheet of MDF, and shaded in all the areas I'm going to keep black. Using lino cutting tools, cut out all the white areas on the MDF.
The fun bit comes when inking the board, carefully with a roller and oil based ink, then carefully laying it down on the printing machine. Finally, I had to lay a sheet of paper, carefully on top of the print and lay a soft blanket over it, before compressing it through the print machine. Et voila:

I'm sure I had a better photo of it that that..