I tried my hand at making a 3D picture. I looked up a step-to-step guide on http://graphicssoft.about.com/cs/photoshop/ht/3danaglyph.htm and spent all evening messing around with it on photoshop. I will probably get a bit better with more practice though.
Enjoy!
Tuesday, November 23, 2010
Monday, November 15, 2010
Examples of modern bridge design
I was googling modern architecture and bridges and this page has a lot of information and examples on it. http://www.corusconstruction.com/en/reference/teaching_resources/architectural_studio_reference/design/bridges/examples_of_modern_bridge_design/
For example this bridge in Manchester is really striking and interesting, and I also found has roughly the same metal structure, painted white like the Sylvester O' Halloran bridge I came across in Limerick.
For example this bridge in Manchester is really striking and interesting, and I also found has roughly the same metal structure, painted white like the Sylvester O' Halloran bridge I came across in Limerick.
Thursday, November 11, 2010
Print, Print, Print
I quite enjoy making woodcut prints so I tried to make one of the bridge lately. I took this photo -
Then mirror imaged it, and drew that image on a sheet of MDF, and shaded in all the areas I'm going to keep black. Using lino cutting tools, cut out all the white areas on the MDF.
The fun bit comes when inking the board, carefully with a roller and oil based ink, then carefully laying it down on the printing machine. Finally, I had to lay a sheet of paper, carefully on top of the print and lay a soft blanket over it, before compressing it through the print machine. Et voila:
Then mirror imaged it, and drew that image on a sheet of MDF, and shaded in all the areas I'm going to keep black. Using lino cutting tools, cut out all the white areas on the MDF.
The fun bit comes when inking the board, carefully with a roller and oil based ink, then carefully laying it down on the printing machine. Finally, I had to lay a sheet of paper, carefully on top of the print and lay a soft blanket over it, before compressing it through the print machine. Et voila:
I'm sure I had a better photo of it that that..
3D attempts...
Well, I tried to recreate this bridge...
![](https://lh3.googleusercontent.com/blogger_img_proxy/AEn0k_tzz3KjiAZVn0Zl323ycXIAbzMYvwmaunIhuyAgiW7Pq6gLuGnTuGvGsFewm5ZunMs0t_QoKSTkYUHNBPaEg-2OMrI1V_TLGhCcDM5bBNO6ARLzLUHMZs00UZpD5l1ufBNP-09c-WXeIS_ARQ=s0-d)
with thin white card... and got this far...
So then I put it to one side and this week started making the structure with wire
Credit to http://www.limerickslife.com/citybridges.htm for the top photo. I took lots myself but didn't come out as good as it.
with thin white card... and got this far...
So then I put it to one side and this week started making the structure with wire
Credit to http://www.limerickslife.com/citybridges.htm for the top photo. I took lots myself but didn't come out as good as it.
Monday, November 1, 2010
Sorry I haven't uploaded anything lately
Well so far I've decided to stick with the fancy bridge that leads into the potato market in Limerick city. I've drawn a few sketches, made half a bridge out of mounting card (It didn't hold) and at the moment I'm chancing my arm at a woodcut print of it!
The pictures won't upload for some unknown reason.. I've tried a few times with no success! I'll upload them in the next post I guess.
The pictures won't upload for some unknown reason.. I've tried a few times with no success! I'll upload them in the next post I guess.
Subscribe to:
Posts (Atom)